Thermoflow – The Fuel Saver For Oil and Gas
For the last fifteen years, this little yellow product has been helping a growing number of savvy home and business owners, slash their annual fuel bills by an average of 10%.
Would you like to enjoy these types of savings, year after year?
Yes… It’s true, this little yellow product is called Thermoflow and it was designed specifically to help reduce fuel costs on oil, gas and propane heating appliances. Thermoflow, is just one of the ranges of products produced by the British company Ecoflow plc.
Let’s take a look at some of the benefits of fitting Thermoflow to your boiler…
- Simple DIY Installation
- No pipes to cut
- Zero running costs and Requires no maintenance
- Fit and forget – until you move house, then take it with you
- Can improve combustion efficiency
- Can reduce emissions
- Suitable for Gas, Oil and Propane boilers and appliances
- Guaranteed – 90 day, 100% money back performance guarantee and 10 year manufacturer’s warranty
Over the last 15 years, this unit has proved highly effective in thousands of homes, offices and factories around the UK, so I am confident you could see good results too.
A single Thermoflow unit is suitable for boilers up to 80,000btu / 25KW. That size boiler is usually adequate for a 3 to 4 bedroom property. Larger boilers will require two or more units.
How Does Thermoflow Work?
In order for combustion to occur, the hydrocarbon molecules in the fuel (the bits that burn) must combine with the oxygen molecules naturally present in the air.
Even the very latest fuel efficient boilers do not burn 100% of the fuel that goes into them, as a result some unburnt fuel disappears up the flue and into the atmosphere.
Obviously this is wasteful; paying for fuel that doesn’t provide any benefit and also contributes to pollution.
Thermoflow, in common with the other Ecoflow products, creates a powerful magnetic field through which the fuel passes prior to combustion.
This process is known as Ionisation by Magnetic Induction or IMI. Ecoflow plc utilise a patented magnetic field arrangement within Thermoflow, which they call Central Reverse Polarity, to further enhance the ionisation process.
The Central Reverse Polarity magnetic ionisation process, temporarily conditions the hydrocarbons so that they more readily combine with the available oxygen, as a result, more of the fuel is burnt and more heat released …
Result…
- Greater heat output for the same volume of fuel
- Less unburnt fuel being released into the atmosphere and causing pollution
- At last, you can help the environment and save money
Very often we don’t require an increased heat output for the same volume of fuel, we want the original heat output for a lower volume of fuel. This is often automatically achieved by the thermostats on the boiler and in the house, though if not, they can easily be manually reduced to a lower setting.
Real Life Testing …
A large UK steel manufacturer was able to run sophisticated tests in order to measure definitively the effect that a Thermoflow fuel saving unit has on flame temperature.
The test used a thermal imaging camera and measured the reflected flame temperature, not the actual flame temperature, which would have been too hot for the camera. This test showed the flame temperature increased from 102°C to 119°C within three minutes.
Their test results showed that fitting the Thermoflow increased the flame temperature in excess of 16% and that the Thermoflow creates more energy / heat from the same given volume of fuel.
Benefits of fitting Thermoflow …
- Better combustion is achieved.
- Pollution is reduced by cutting down the amount of un-burnt fuel.
- The flame burns hotter which means that the heat transfers faster in heat exchangers.
- Water is heated quicker.
- Predetermined temperature is reached quicker so thermostats cut off earlier.
- Your own 90-day, satisfaction or 100% money back guarantee.
- Thermoflow costs just £55 RRP.
“…Better than promised with over 10% saving on gas consumption… Initial investment of under £4,000 paid back within 6 months… have given another order for £10,000 to install units in our heat treatment department.”
T. W. Pearson, Special Steel Manufacturers
